Otto Tuners
Product Description

The Otto Tuning Forks are used for relaxation, and for sending vibrations into the bones. The forks are tuned to the frequencies of 32hz, 64hz and 128hz. They vibrate at a low pitch due to their weighted prongs. Start your explorations with the 128hz. These forks are especially effective when placed on the sternum, vertebra and meridian points.Used primarily for relaxation and grounding, the Otto Tuner kit resonates with the deeper tones of the Earth. The Otto Tuner is the note of C in the diatonic scale.These frequencies project sound into the physical body, especially in the bones. The effect is to replenish the tone of tissues and to align them well. Great for sore muscles and relaxation of bones. This Set consists of 3 tuning forks.

These 3 forks are based on the following frequencies:-

  • 32 Hz
  • 64 Hz
  • 128 Hz

C-32Hz - works with skin and hair to stimulate nerves and hair. Good for grounding.

C-64Hz - helps loosen sacral ligaments and stimulate and balance between the sympathetic and parasympathetic nervous systems. Useful in emotional trauma and grounding.

C-128Hz - is used for grounding and relaxation. This frequency is also used by EMT's and Paramedics to locate fractures in bone.


Product Name
Otto Tuners
USD$ 100.00    Shiping FREE
Enter Quantity



Introduction of Tuning Fork

Tuning forks were originally used to tune musical instruments because they emanate perfect sine wave sound patterns that allow you to fine-tune instruments to the proper pitch.

When you strike a tuning fork however, you'll notice how it causes the air around the fork to vibrate, sending out very strong vibrating impulses through the air. Because of this, they have been adopted by healers who use them to increase the amount of energy on parts of the body they are trying to heal.

Uses & Benefits of Tuning Forks
Tuning forks, Owing to its ability to emit vibrations of various frequencies are used for healing on being activated , it also creates the bibrations of the same frequency in the surrounding air space. This vibration then reacts with the  vibrations of human body to produce the healing effect.
» Removes toxins » Relives Pain
» Helps to heal soft tissue » Reduce Stress
» Increases physical energy » Balances Nervous System
» Uncover & Balance emotion » Induce Relaxation
» Transform & facilitate inner harmony » Brings about homeostasis with in the body
Who uses Tuning forks ?

There has beenan increasing interest in using tuning forks for health. Fork are proving to be a very effective tool for enhancing and balancing at all levels of human being, and maintain good health. It is being used by

» Massage therapists » Meditation
» Chiropractors » Yoga practitioners
» Acupuncturists » Sound healers
Tuning Fork Types

There are two types of  prime tuning forks; weighted and unweighted. The weighted tuning forks are typically used on the body as well as by the ears to relieve pain from inflammation such as arthritis and other joint, muscle and nerve pain. These are the ones with the weights on the end of each prong.

The unweighted forks are used by the ears and around the body for balancing the nervous and energy systems and can assist with emotional, spiritual, physical and mental health and awareness.

What is the difference between weighted and unweighted Tuning Forks?
» These Forks work more on the Physical level.
» One can feel the vibration more stronger & at a deeper level, when its stem is placed on the body, due to the weights at the end of each prong.
» The sound lasts longer, and is softer & more diffused.
» They are shorter in length than fork of same frequency in Unweighted type.
» These are excellent to for relief in pain, to reduce inflammation and to induce relaxation.
» They are normally placed on the body or by the ears.
» The weighted tuning fork has round weight at the end of each prong and it look like this:-
» These forks work more on Subtle level.(delicate or mysterious)
» They move in a physically lesser motion. The feeling of the vibration is more subtle, when its stem is placed on the body.
» The sound does not last as long, but it is sharper & more crystallized.
» They are lighter in weight.
» They are longer in length than the same fork in weighted type
» To tone them,one could gently tap two forks together or strike them on the Tuning Fork Activator.
» The Unweighted ends look like this:-
The Tuning fork in Correct way
Should not be held by the prongs. It will stop the vibration. The correct place to hold it is from The Stem Handle. This has been illustrated below:-
Wrong Position
(Never hold tuning fork above the stem area)
Right Position
(Always hold tuning fork by stem)
How can a Tuning Fork be Activated?
This can be done in several ways:-
» Hold the tuning fork in one hand in the right position as shown in image and strike it moderately by a rubber mallet. This gives a loud monotonic sound.
» Hold the tuning fork by the shank and strike it moderately on tuning fork activator.
» Tuning Fork can also be activated by striking it on crest of the palm or on upper of the knee bend.
Important While Activating a Tuning Forks
» Hold the tuning fork by the shank in the middle of the shank.
» Do not touch the fork any where on the prongs after activating.
» Keep a firm grip on the shank while holding the fork.
» Hold the tuning fork on its side, so you are striking only one of the prongs or strike only one of the prongs while using a rubber mallet.
Quality & Precision

The performance of Quality of tuning forks mainly depends on 2 factors - type of material used and accuracy of  frequency .

» Both the factors are of prime importance without any compromise. A special grade aluminium alloy is used to make the tuning forks so that forks give sustained monotone frequency for a longer time period. The forks are milled on computerized machines and are calibrated on electronic frequency meter to the tune of +/- 0.25% accuracy.
We offer 1 Years Manufacturer Warranty on all our products which will be replaced FREE of cost during this duration in case of any manufacturing defect.
Why Aluminium Alloy Tuning Forks are better than Stainless Steel Tuning Forks?
» The Aluminum forks sustain longer pure tones as well as ring sustained overtones.
» The rich overtones produced by Aluminium alloy tuning forks create a deeper and richer experience. Overtones create an atmosphere where one can connect with one's multi-dimensional essence.
» Aluminium alloy forks are softer than steel forks, so they are easier to use for longer sessions.
» Aluminium forks lasts longer. We have seen that even a 15-20 years old Aluminium fork vibrates and give rich overtones the same way like a new fork.
» Aluminium forks are cheaper in price than steel forks.
Payment Policy
» PayPal is Accepted for International Buyers
» For values over US$ 900.00 we also accept bank transfers details for which can be provided whenever required.
» Item will be shipped within 4 to 5 days of payment receipt. Should there be any delay, you will be informed about the same by mail
Shipping, Insurance & Tracking Instructions
» Buyers to prepay shipping and handling.
» All our products are delivered in 4-7 business days time after the payment is received.
» We ship by reputed courier company such as Fedex, TNT, DHL etc or by EMS Express depending on location.
» We ship Worldwide Except India
» We combine shipping for multiple auctions.
» We will not ship to P.O.Box APO address
» Product is shipped immediately once the payment is cleared.
» Insurance is included in this auction.
» International import duties, taxes etc are paid by the buyer and we are not responsible for that.
» Tracking can be given on request.
Manufacturing Unit
During our golden experience of past 15 years, our priority has been customer satisfaction & BEST quality standards. Our policy of 100% satisfaction guarantee reflects our commitment to your satisfaction with our products & services. This is the sole reason that we have earned a remarkable reputation in the international market.